Filter
Ball joint, transverse control arm, 17 mm
Product number: 140-0625

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€9.80*
Ball joint, transverse control arm, Golf 2, 17mm
Product number: 204-0402

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€9.80*
Ball joint, transverse control arm, Golf 2, 19mm
Product number: 204-0404

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€9.80*
Clamp, rubber mount, stabilizer, front, inner
Product number: 204-0440

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.50*
Clamp, stabilizer, front, inner
Product number: 140-0618-08

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€7.80*
In-house production
Clamp, stabilizer, front, outer
Product number: 140-0618-10

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€8.80*
Coupling rod, transvers control arm, 1.0-1.8
Product number: 204-0420

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€5.80*
Eccentric washer, spring strut, Golf 1
Product number: 140-3421

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.90*
Mounting kit, transverse control arm, 12.77-7.92
Product number: 140-0535

Available in 30 days, delivery time 2-5 days

€69.80*
Mounting kit, transverse control arm, 4.74-7.92
Product number: 140-0540

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€28.70*
Mounting kit, transverse control arm, Golf 2
Product number: 204-0400

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€18.80*
In-house production
Nut, M7, Beetle/Bus/Golf/Porsche
Product number: 020-4150-06

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€0.90*
Pot washer, coupling rod/transvers control arm
Product number: 204-0428-03

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.80*
Rubber mount, coupling rod/transvers control arm
Product number: 204-0428

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€1.10*
Rubber mount, stabilizer, front, inner, 17mm
Product number: 204-0430

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€1.70*
Rubber mount, stabilizer, front, inner, Golf 1
Product number: 140-0610

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.80*
Rubber mount, stabilizer/front, outer, 74-92
Product number: 140-0615

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.80*
Rubber mount, transverse control arm, front, 74-92
Product number: 140-0605

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.90*
Rubber mount, transverse control arm, front, Golf 2
Product number: 204-0405

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.30*
Rubber mount, transverse control arm, Golf 2, new shape
Product number: 204-0408

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€4.80*
Rubber mount, transverse control arm, Golf 2, old shape
Product number: 204-0407

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€7.50*
Rubber mount, transverse control arm, rear, 74-92
Product number: 140-0600

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€4.90*
Screw set, transvers control arm, front
Product number: 204-0410-12

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€9.80*
Screw set, transvers control arm, Golf 2, 83-92
Product number: 204-0410-10

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€18.50*

Stabilizer, transverse control arm, add-on-parts for Polo 1, Audi, Scirocco and K70

The Stabilizer, transverse control arm, add-on-parts selection is part of the Polo 1, Audi, Scirocco and K70 vehicle group at Hoffmann Speedster. It helps narrow down the type of component or accessory within Front axle, Steering. Since several models appear in this group, the individual product listing rather than the broad category name determines whether something fits your car.

Even similar-looking items can differ in dimensions, fittings and connections. Check the product number, intended position, model and relevant engine or body variant before ordering. A shared catalogue location does not make different models or generations mechanically interchangeable.

This shop section includes several different vehicle models and mechanical specifications. Being listed here does not mean that every item fits a Polo 1, an Audi, a Scirocco and a K70 alike. Refer to the actual product listing for the model, configuration and installation details. Parts shown for other Volkswagen models must not be assumed to fit these cars without checking.

Function and differences

Steering precision depends on several connected components. Joint play, split gaiters and worn bearings need proper inspection; work on wheel guidance may also require alignment afterwards.

This category belongs to Front axle, Steering. The shop structure is useful when you need one particular position or variant instead of the complete assembly. Compare the existing part with the product information and avoid choosing by appearance alone.

The more precise category is Vorderachse, Lenkung > Stabi, Querlenker, Anbauteile. This hierarchy is particularly important for colour, position and material variants.

Fitment and selection

Start by identifying the job the part must do and whether a single component or several associated items are required. Inspecting the surrounding area can reveal additional wear; replacing one piece may not solve a problem caused by a nearby mounting, seal or connection.

Check dimensions, fitting position, connectors, finish and mounting method where these matter for Stabilizer, transverse control arm, add-on-parts. Photographs and original part numbers make comparison easier. If a specification is missing or inconsistent, clarify the fitment before purchasing rather than guessing.

A noise or symptom does not necessarily identify one failed component. Check adjacent mounts, connections and fixings systematically before ordering. Safety-related work must follow the appropriate workshop instructions and tightening specifications.

Inspection and careful fitting

A careful assessment before dismantling makes the job easier. Record the position of existing parts and follow the relevant repair instructions. Older cars may have corrosion, non-standard repairs or later modifications, so the actual condition of the vehicle matters as much as the original specification.

  • Record the fitted part, its location and the vehicle specification.
  • Compare dimensions, part numbers and fixing points with the item details.
  • Inspect adjacent components and the condition of their mountings.
  • Check the outcome after fitting or application as instructed.

Finish with a visual and functional check. Braking, steering, electrical and other safety-related work must follow appropriate professional requirements. For care products and general accessories, observe the manufacturer’s handling and application instructions instead.

Related categories

Other relevant categories for this vehicle group: Suspension. These routes lead to identified category pages, but each part still requires its own fitment check.

For associated accessories, too, read the exact product details. Some items are universal, while others apply only to specific vehicle versions. The general catalogue grouping is never a substitute for a fitment check.

Frequently asked questions: Stabilizer, transverse control arm, add-on-parts

Does Stabilizer, transverse control arm, add-on-parts fit every vehicle in this group?

No. This category covers several distinct vehicles. The item description must confirm the correct model and version.

What should I check before ordering?

Compare the item number, dimensions, fixing method, position and stated vehicle fitment.

When should adjacent components be inspected?

When connected parts share wear or a fault, checking mountings, seals and connections can prevent repeat work.

Can similar-looking parts from different models be interchanged?

Not automatically. Visual similarity and a common shop section do not prove interchangeability.

Where can I find related items?

Use the relevant subcategories and verified links, then inspect each individual listing.