Rear window seal for the Bus

Rear of the VW Bus T2: window seals for the rear window

At the rear of the VW Bus T2, the rear-window seal performs an important task between the glazing, frame and body. It keeps the rear window in its intended position and seals the transition against moisture, dirt and draughts. This category contains different rear-window seals, including versions with and without a groove as well as a variant for the rear window of the pickup. This makes it clear that the position on the vehicle is not the only factor when choosing a seal; the respective window and vehicle configuration must also be considered. Especially on a classic VW Bus T2, it is therefore worthwhile checking the sealing around the rear window regularly and examining it more closely when clear signs of ageing appear.

Why is sealing at the rear of the VW Bus T2 so important?

The rear window forms a large transition between the glass and the body. This is exactly where the rear window seal ensures that the glass is properly enclosed and that the area remains sealed against external influences. If the rubber profile becomes hard, cracked or porous over time, moisture can enter more easily between the seal, glass and frame. Wind noise or draughts can also occur if the profile no longer sits evenly. On older vehicles in particular, the corners and transitions of the rear-window seal should therefore be inspected carefully. A suitable seal for the rear window is consequently an important component both for regular maintenance and during restoration.

When should I inspect or replace the rear window seal?

A thorough visual inspection already provides many indications of the seal's condition. Look for cracks, brittle surfaces, hardened sections or visible deformation of the rubber profile. Areas where the seal lifts away from the glass or frame should also be examined more closely. Water marks, moisture in the rear of the interior or noticeable wind noise can likewise indicate impaired rear-window sealing. Inspection is especially important after long periods of storage or when work is already being carried out on the glazing or rear body area. If the rear window is removed, the existing seal should be assessed carefully before being reused.

How is the rear window seal replaced?

When replacing the rear-window seal, the glass, frame and rubber profile must be handled carefully. The exact procedure depends on the respective rear window and the type of seal being used.

• Inspect the old rear-window seal: Before and during removal, check for cracks, hardening, damaged edges and areas where the profile no longer sits evenly.
• Check the window frame: After removal, clear away dirt and residue and carefully inspect the contact area before installing the new seal.
• Install the sealing profile evenly: Pay particular attention to corners and transitions, making sure that the seal follows the correct path and is neither twisted nor unevenly tensioned.
• Check the position of the rear window: After installation, verify that the glass and seal sit evenly all the way around and that the profile is completely in its intended position.

Removing and reinstalling a rear window requires careful work. The decisive point is to install the rear-window seal correctly so that the glass, seal and adjacent body area are not subjected to unnecessary stress.

Which rear version is suitable for my VW Bus T2?

When selecting a window seal for the rear, you should first consider the existing rear window and the respective vehicle configuration. The category contains rear-window seals with and without a groove as well as a specific version for the pickup. A groove may be relevant to the respective window design or for accommodating trim. The existing seal, window and respective product information should therefore be compared carefully. Vehicle version and production period can also play a role in identifying the correct part. This allows you to select the suitable rear window seal specifically for the rear-window area of your VW Bus T2.