Axle pieces for the Bus

Rear axle parts

The perfect grip on the road – Robust rear axle parts for your VW Bus T2

Flawless guidance of the rear axle is the be-all and end-all for every enjoyable outing with your classic – and should be the focus both during regular inspection and comprehensive suspension service. Different components can be used here – depending on the stress and your own demands on driving stability. In addition to daily stress via control arms, trailing arms & co., a complete set of new rear axle parts may be due after many thousands of miles on the track. Then nothing stands in the way of a safe and comfortable classic car experience. We reveal why the topic of rear axle parts should be checked regularly, what steps need to be considered during overhaul – and which versions are used for individual application purposes. We also look specifically at bushing kits and trailing arms.

Why are rear axle parts an important step in classic car maintenance?

Stability and precise directional control form the basis of every drive – only when the rear axle parts work free of play can power be transmitted cleanly to the asphalt or the Bulli sit safely in the corner. It is not enough to simply accept a rumbling driving noise or spongy handling. While the symptoms are merely glossed over in this way, worn bushings, brittle bearings, or rusted-out brackets stubbornly persist – for the latter, you should also rely on precisely fitting rear axle parts or complete repair kits. These are renewed using suitable tools, pullers & co.

When should I check my rear axle parts?

Before every classic car season & regularly on the lift! When inspecting the rear axle parts, the traces of hard everyday life are removed: worn rubber bushings, imprecise spongy behavior, and unwanted background noises. In addition, uneven tire wear and an insecure rear end disappear in the workshop instead of spoiling the driving pleasure.

How does the replacement of rear axle parts work?

These four belong to the basic equipment:

• Precisely fitting rear axle parts of your choice
• A workshop manual exclusively for your T2
• Fresh lock washers and new bolts
• Jack, jack stands, and torque wrench

For most installation work, a stable base is recommended as the foundation for professional replacement. Set the new components stress-free and secure them (if applicable) with prescribed torques. Dry your hands gently with a towel that you only use for fine handlings. Afterwards, you can have the suspension geometry professionally measured and adjusted. Please note that you always carry out the installation of the rear axle parts with the utmost care – otherwise the tracking will warp and the handling will become uncontrolled. After the replacement, a careful test drive is recommended. This supplies your rear axle with the corresponding confidence and necessary smooth running.

Which rear axle parts suit me?

Actually, asking a counter-question is impolite. But in order to choose the right components or the matching overhaul kit in terms of rear axle parts, we want to know from you: Which driving style would you assign your bus to? Do you desire original durability, reinforced rubber bushings for the camping trip, or uncompromising road holding? Because for every application area there is the matching variant.

• Original version: Your Bulli copes with all standard components in everyday life. Whether rubber bushing, tension strut, or axle tube: you have the free choice for a faithful restoration.
• Reinforced version (Heavy-Duty): So that your rear axle doesn't give out even under heavy loading or motorhome conversion, you should rely on robust rear axle parts that securely support your vehicle even under harsher conditions. You should also make sure that inferior cheap parts are not on the list of spare parts. Particularly durable for long trips are, for example, reinforced brand sets. Paired with high-quality material, we say "Ade!" to spongy handling and material fatigue. Tip: For heavy-duty use, a complete repair kit including all mounting parts is recommended. This protects your nerves particularly sustainably – and keeps the Bulli safely in its lane.
• Sporty version: For lowered buses or a sporty driving style, you can make the suspension specifically firmer. Optimized rear axle parts with harder rubber compounds or PU bushings are recommended for this. These withstand increased lateral forces and simultaneously ensure maximum directional stability.
• Restoration version: This application purpose demands uncompromising quality down to the smallest detail. Therefore, equipment that exactly matches VW factory specifications is exactly the right thing for you. At Hoffmann Speedster, you will also find these components in the area for the professional rear axle.