Seat covers with basket pattern for the Bus

Basketweave for your VW Bus T2: seat covers for different bench-seat versions

Basketweave describes a characteristic surface design used on VW Bus T2 seat covers for different seating positions and bench-seat versions. The linked category includes covers for the rear bench of the Double Cab, for 1/3 and 3/4 middle benches and for the rear bench. Different production periods are taken into account depending on the seating position. The colour versions Off-White, Black, Grey and Beige are also available. A seat cover should therefore not be selected only according to its colour or pattern. The important factor is that the seat cover with Basketweave matches the existing bench seat, seat division and stated production period of the VW Bus T2.

Why is Basketweave important for VW Bus T2 seat covers?

The Basketweave pattern forms the visible surface of the seat cushion and backrest and therefore has a strong influence on the overall appearance of the interior. At the same time, the cover must structurally match the respective seat. The category distinguishes, for example, between the 1/3 middle bench, 3/4 middle bench and rear bench as well as the rear bench of the Double Cab. These distinctions are important because the shape and division of the seating surfaces can differ. A suitable cover can be guided more evenly over the padding and backrest and secured at the intended points. Basketweave should therefore always be considered together with seating position, seat division, production period and desired colour version.

When should I inspect or replace seat covers with Basketweave?

Cracks, open seams, heavily worn surfaces or clearly distorted areas are typical reasons to inspect an existing cover more closely. A cover that no longer sits evenly on the seat cushion and backrest can also indicate wear or changes to the underlying seat structure. When the old seat cover with Basketweave is removed, the padding should therefore be inspected at the same time. Heavily compressed or deformed padding can prevent a new cover from fitting neatly. During restoration, it is advisable to assess the cover, padding, fastenings and bench-seat structure together before renewing the visible surface.

How are seat covers with Basketweave replaced?

During replacement, the existing seat structure should be carefully exposed. The new cover is then aligned according to the respective bench seat and its division and secured evenly.

• Remove the old seat cover carefully: Release the fastenings and observe how the existing cover was guided over the seat cushion, backrest, edges and transitions.
• Inspect the padding and bench seat: Check the padding, base and fastening areas for deformation, heavy compression or visible damage.
• Align the new cover correctly: Position the Basketweave pattern, seams and contours evenly according to the relevant 1/3, 3/4 or rear-bench version.
• Check fit and tension afterwards: Make sure the cover sits evenly and that no unnecessary wrinkles, shifts or loose areas remain.

Careful installation supports the correct interaction of Basketweave, seat cover and padding and helps preserve the contours of the respective bench seat evenly.

Which Basketweave is suitable for my VW Bus T2?

The main selection criteria are seating position, seat division, production period and colour. The linked category contains covers for the Double Cab rear bench from 1964 to 1973, 1/3 middle bench from 1967 to 1973 and 1973 to 1979, 3/4 middle bench from 1967 to 1973 and 1973 to 1979, and rear bench from 1967 to 1973. The listed colour versions are Off-White, Black, Grey and Beige. Before selecting a cover, compare the existing bench seat, division, production period and desired colour with the respective product information. This makes it possible to select the correct Basketweave for the intended seating area.