Add-on parts for the fairing of the Bus

Accessories for the VW Bus T2 – fasteners and additions for interior panels

The accessories used around the interior panels of the VW Bus T2 perform numerous tasks involving fastening, protection, storage and functional additions. The category includes clips, clamps and rubber grommets for door and side panels, air ducts for the doors, door and sliding-door foils, armrest caps, door storage trays and various fastening parts for door handles. Other components include a spare-wheel cover and air-outlet trim pieces for the door panels. The category therefore does not consist of a single type of part, but of various additions for several areas of the interior. During restoration, you should check carefully which component is required at which position and which existing fasteners or trim components can still be reused.

Why are accessories important for the interior panels of the VW Bus T2?

The accessories ensure that trim panels and adjacent interior components can be secured or completed correctly. Clamps and rubber grommets are particularly important for door and side panels because they help connect the panel to the intended mounting points. Door foils and the sliding-door foil, on the other hand, are located behind the visible panels and form part of the construction of these areas. Air ducts in the front doors perform another functional role, while door storage trays add useful storage space. When interior panels are renewed, you should therefore inspect more than only the visible panels. Missing or damaged small components can prevent new panels from sitting correctly or may require sections to be opened again after installation.

When should I inspect or replace accessories in my VW Bus T2?

Inspection of the accessories is particularly useful when door or side panels are removed, individual panels have become loose or the interior is being completely restored. Broken trim-panel clips, damaged rubber grommets, missing clamps or defective fasteners should ideally be identified before reassembly. Door and sliding-door foils should also be checked for visible damage while the panels are removed. With air ducts, storage trays or armrest caps, the main question is whether the existing component is complete and suitable for the respective installation position. Especially on vehicles that have already been restored, it is advisable to inspect the actual equipment because individual parts may have been modified or replaced over the years.

How are accessories for the VW Bus T2 interior panels installed?

When installing accessories, it is important that every component is assigned to the correct position and function. Before assembly, you should therefore inspect all fastening and supplementary parts together with the corresponding trim panels.

• Check clips, clamps and rubber grommets: Replace damaged or missing fasteners before fitting new door or side panels so that the panels are held evenly.
• Install door and sliding-door foils first: Inspect and fit the foils before the visible panel is finally attached so that unnecessary dismantling is avoided later.
• Assign air ducts to the correct position: For door air ducts, consider the left or right version and intended production period and inspect the existing connection points.
• Check additional interior parts separately: Inspect door storage trays, armrest caps, trim pieces and door-handle fasteners for correct installation position and secure mounting.

A clear installation sequence helps ensure that concealed fastening and functional parts are fitted first and the visible panels can then be installed without unnecessary rework.

Which accessories fit my VW Bus T2?

When selecting suitable accessories, you should always start with the specific installation position. The category includes clips and clamp sets for door and side panels, rubber grommets, air ducts for left and right doors, door and sliding-door foils, armrest caps, door-handle fasteners and door storage trays in different versions. Some components are also assigned to a particular production period, such as the door air ducts or sliding-door foil. Other parts are intended for specific interior areas or types of trim panel. Before choosing, check which component needs replacing, where it is installed and which existing construction your T2 has. This allows you to select the required accessories specifically for the actual interior configuration.