Filter
Engine-compartment seal, Bus T1, lateral, Top Quality
Product number: 089-0325

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.90*
Engine-compartment seal, front, end face wall
Product number: 020-5106

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€9.90*
Engine-compartment seal, rear, closing panel
Product number: 020-5107-20

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€12.90*
In-house production
Gasket, brake- / clutch-pedal, Bus T1/T2
Product number: 089-1410

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.70*
Gasket, brake-/clutch-pedal, Bus T1
Product number: 089-1409

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.80*
In-house production
Grommet, engine tin/body, 31mm
Product number: 020-5295-04

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.60*
In-house production
Grommet, wire- / hose-channel, 28 mm
Product number: 020-5295-05

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.90*
Plug, floor panel, 15mm
Product number: 020-5295-35

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.90*
Plug, floor panel, 20mm
Product number: 020-5295-38

Currently not available

€2.90*
Plug, rear wheel housing, 10mm
Product number: 020-5295-30

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€1.90*
Protecting cap, brake light switch, 2 pins
Product number: 020-5274

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.80*
Protecting cap, brake light switch, old form
Product number: 020-5275-08

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€4.90*
Protecting cap, master brake cylinder, -.66
Product number: 020-5277-15

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€5.80*
Rubber cap, reverse light/turn indicator
Product number: 020-4473-15

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.70*
Rubber grommet, fuel line/front engine tin, 6mm
Product number: 020-5280-05

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€1.50*
Rubber grommet, fuel line/front engine tin, 8mm
Product number: 020-5280-07

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.80*
Rubber lead-through, heater cable (old)
Product number: 020-5290-04

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.30*
Rubber lead-through, steering column, Bus T1
Product number: 089-4202

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€14.80*
Rubber seal, brake line, 4 pieces
Product number: 020-5279-04

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€6.50*
Rubber seal, brake line, front or rear
Product number: 020-5279

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€1.80*
In-house production
Rubber seal, clutch- and handbrake cable
Product number: 020-5289

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.90*
Rubber seal, speedometer cable, Bus T1
Product number: 089-1420

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€5.90*
Rubber seal, starter cable
Product number: 020-5292

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€3.90*
In-house production
Seal, column tube/steering, lower
Product number: 089-4202-08

Ready for immediate shipment, delivery time: 1-3 days, abroad + bulky goods longer delivery time

€2.80*

Chassis seals for the Bus

When your Bulli feels solid from the ground up again

The VW Bus T1 is more than just a classic vehicle – it is a rolling piece of history, built on character, craftsmanship, and timeless design. To keep this icon alive for decades, every detail matters. One of the most overlooked but essential elements are the chassis seals. In this category you will find Chassis Seals for VW Bus T1 – Buy precision-fit spare parts online, designed to restore protection, stability, and long-term durability to your classic.

Whether you are performing a full restoration or repairing specific weak points, chassis sealing is the hidden foundation of every well-preserved Bulli.


Why chassis seals are so important on the VW T1

The chassis forms the structural base of your VW Bus T1. It carries loads, absorbs vibrations, and connects key body sections. Over time, original seals deteriorate due to age, moisture, and constant movement. Once this happens, gaps can form where water, dirt, and debris begin to enter.

The consequences are often invisible at first – but serious in the long run: corrosion starts in hidden areas, structural integrity weakens, and restoration costs increase significantly.

New chassis seals prevent exactly this. They protect critical connection points between body and frame and ensure that your Bulli remains solid and reliable.


The invisible heroes of every restoration

Chassis seals may not be visible in everyday use, but they play a crucial role in the long-term survival of your VW T1. They seal transitions between components, reduce friction between metal parts, and prevent moisture from entering the structure.

Especially during a full restoration, these components are essential. Without proper sealing, even newly restored bodywork can quickly suffer from hidden damage.


Everything you need for a proper chassis sealing job

In this category you will find a wide range of components designed for professional-grade sealing solutions:

  • body-to-frame sealing strips

  • floor panel transition seals

  • rubber profiles for chassis joints

  • sealing elements for mounting points

  • suspension area seals

  • restoration-specific sealing solutions

  • structural transition gaskets

Each part is designed for accurate fitment and reliable long-term performance.


Precision fit meets durable quality

A classic like the VW Bus T1 deserves parts that match its engineering spirit. That is why precision and material quality are at the core of these chassis seals. They are designed to integrate seamlessly into the original structure while providing modern durability.

Manufactured from high-quality, weather-resistant rubber compounds, these seals withstand moisture, temperature changes, and long-term mechanical stress – ensuring lasting protection.


For restorers, mechanics, and true Bulli enthusiasts

Whether you are rebuilding your VW T1 from the ground up or addressing specific weak points, chassis seals are a critical step in any serious restoration project.

Many common issues such as hidden rust or moisture inside the cabin can be prevented by properly sealing the chassis early on. That is why these small components play such a big role in long-term preservation.


Conclusion: a strong foundation for a legendary vehicle

Chassis seals may not be the most visible parts of your VW Bus T1, but they are among the most important. Without them, even the best restoration cannot last.

With high-quality replacement parts from this category, you ensure that your Bulli stays structurally sound, well-protected, and ready for many more years on the road.

Because every legend deserves a solid foundation – and every VW T1 begins from underneath.